Shipping to 
and 
SMA antenna RF cable extender
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.
From 13,00€
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 13,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– 1 x Low loss antenna extender (RG58 RF cable) for SMA connectors (0.1m, 1m, 2.5m, 5m or 20m).
Enhance your experience, add to your cart:
-
Shield for Septentrio Native Ethernet
Original price was: 42,00€.38,00€Current price is: 38,00€.
SMA antenna RF cable extender
From 13,00€
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 13,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– 1 x Low loss antenna extender (RG58 RF cable) for SMA connectors (0.1m, 1m, 2.5m, 5m or 20m).
Low loss antenna extender for SMA connectors, in many possible lengths: 0.1, 1, 2.5, 5 and 20 meters.
ArduSimple’s extenders are using high quality RG58 RF cable. To make a comparison, these extenders need 5 meters to have the same loss as a 2.5 meter low quality RF174 RF cable.
Recommended maximum length:
– For GPS/GNSS antenna: 20 meters
– For XBee LR radio: 2.5m
Good to know:
– Compatible with both GPS/GNSS antenna & XBee LR radio.
Documentation
Start here:
Datasheet- We didn't find time to create this 3D CAD model, contact us to request it
You may also need…
Description
Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.
Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units
Specifications
2B Survey Budget antenna
Antenna element
· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm
Electrical
· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2
Mechanical
· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male
Environmental
· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed
Documentation
Start here
Low loss antenna extender for SMA connectors, in many possible lengths: 0.1, 1, 2.5, 5 and 20 meters.
ArduSimple’s extenders are using high quality RG58 RF cable. To make a comparison, these extenders need 5 meters to have the same loss as a 2.5 meter low quality RF174 RF cable.
Recommended maximum length:
– For GPS/GNSS antenna: 20 meters
– For XBee LR radio: 2.5m
Good to know:
– Compatible with both GPS/GNSS antenna & XBee LR radio.
Documentation
Start here:- Datasheet
- We didn't find time to create this 3D CAD model, contact us to request it
