Shipping to 
United States (USA)
and 
BT+BLE Bridge
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.
66,00€
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 66,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– 1 BT+BLE Bridge
Enhance your experience, add to your cart:
-
Shield for Septentrio Native Ethernet
Original price was: 42,00€.38,00€Current price is: 38,00€.
BT+BLE Bridge
66,00€
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 66,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– 1 BT+BLE Bridge
With Ardusimple BT+BLE Bridge module, you will be able to connect an RTK system with your iOS or Android device via classic Bluetooth (BT) or Bluetooth low energy (BLE) and use it with your preferred app.
The plugin acts like a bridge/tunnel sending any incoming data from your GNSS receiver towards the listening device and sending all incoming data from your BT/BLE device to your GNSS receiver.
It does not contain any other logic and is ideal for Androis and iOS developers or any other platform with BT or BLE.
Check this tutorial to learn how to update its firmware.
Checkout the BT+BLE Bridge hookup guide to learn everything about this product.
Good to know:
– Configuration is at 115’200bps
– Compatible with simpleRTK3B, simpleRTK2B and simpleRTK2Blite
– Compatible with BLE (Bluetooth Low Energy) and BT 2.0 (Bluetooth Classic)
– It’s based on ESP32, so you can also write you own software on it
– It is the same hardware as the WiFi NTRIP Master so you can also use it for that purpose (by changing the firmware)
You may also need…
-
RTK starter kits
simpleRTK2B – Basic Starter Kit
From 211,00€ This product has multiple variants. The options may be chosen on the product page -
Sale!
Made in EuropeProfessionalRTK Portable Bluetooth Kit
Original price was: 275,00€.247,50€Current price is: 247,50€. -
-
-
-
Description
Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.
Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units
Specifications
2B Survey Budget antenna
Antenna element
· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm
Electrical
· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2
Mechanical
· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male
Environmental
· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed
Documentation
Start here
With Ardusimple BT+BLE Bridge module, you will be able to connect an RTK system with your iOS or Android device via classic Bluetooth (BT) or Bluetooth low energy (BLE) and use it with your preferred app.
The plugin acts like a bridge/tunnel sending any incoming data from your GNSS receiver towards the listening device and sending all incoming data from your BT/BLE device to your GNSS receiver.
It does not contain any other logic and is ideal for Androis and iOS developers or any other platform with BT or BLE.
Check this tutorial to learn how to update its firmware.
Checkout the BT+BLE Bridge hookup guide to learn everything about this product.
Good to know:
– Configuration is at 115’200bps
– Compatible with simpleRTK3B, simpleRTK2B and simpleRTK2Blite
– Compatible with BLE (Bluetooth Low Energy) and BT 2.0 (Bluetooth Classic)
– It’s based on ESP32, so you can also write you own software on it
– It is the same hardware as the WiFi NTRIP Master so you can also use it for that purpose (by changing the firmware)
You may also need…
-
RTK starter kits
simpleRTK2B – Basic Starter Kit
From 211,00€ This product has multiple variants. The options may be chosen on the product page -
Sale!Made in EuropeProfessional
RTK Portable Bluetooth Kit
Original price was: 275,00€.247,50€Current price is: 247,50€. -
-
-
-
