Shipping to 
and 
Calibrated Survey GNSS Multiband antenna (IP67)
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.
149,00€
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 149,00€ |
| >=50 | 131,60€ Click here for bulk orders |
| >500 | Contact us for special pricing |
Includes:
– Calibrated Survey Dualband external GNSS antenna
– 1.5m pigtail cable with TNC to SMA connector
Enhance your experience, add to your cart:
-
Shield for Septentrio Native Ethernet
Original price was: 42,00€.38,00€Current price is: 38,00€.
Calibrated Survey GNSS Multiband antenna (IP67)
149,00€
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 149,00€ |
| >=50 | 131,60€ Click here for bulk orders |
| >500 | Contact us for special pricing |
Includes:
– Calibrated Survey Dualband external GNSS antenna
– 1.5m pigtail cable with TNC to SMA connector
Survey grade dual band (L1, L2/E5b/B2I) active GNSS antenna, calibrated by NGS, with TNC connector and 1.5m rugged cable terminated with SMA male. Ideal for surveying applications including PPK and post-processing. Also compatible with high end receivers from Novatel, Trimble, Leica, Topcon and others.
Good to know:
– Compatible with all simpleRTK2B boards as well as any other multiband GNSS receiver in the market.
– Shockproof gel ring at the perimeter of the antenna to minimize damage in case of fall
– Antenna calibration files can be downloaded from NGS website (Manufacturer: ArduSimple, Model: AS-ANT2B-CAL): https://www.ngs.noaa.gov/ANTCAL/index.xhtml#
Specifications
2B Survey Calibrated antennaAntenna element
- Supported positioning signal bands:
- GPS: L1, L2
- GLONASS: G1, G2
- BeiDou: B1, B2
- Galileo: E1, E5b
- QZSS: L1, L2
- SBAS: WAAS, EGNOS, MSAS and GAGAN
- Polarization: RHCP
- Peak gain: 5dBi
- Axial Ratio @ zenith: <3dB
- Azimuth Coverage: 360 degrees
- Impedance: 50 ohm
- Phase center error: ±1mm
- Calibration file available
- Supply voltage: 3-12V
- Typical supply current @ 3V: 45mA
- Average LNA gain: 40dB
- Maximum Noise Figure: 1.5dB
- Maximum VSWR: 2
- Maximum length: 152mm
- Weight: 400g
- Mounting style: Magnetic base (requires accessory) or 5/8” x 11TPI thread
- Connector: TNC female
- Cable length: Includes 1.5 meter cable terminated in SMA male
- Operating Temperature: -40 to +85°C
- Storage Temperature: -40 to +85°C
- IP Rating: IP67 (excluding air vent in screw hole, which can be sealed when installed)
- RoHS: Yes
Documentation
Start here:- Get started with the User Guide
Datasheet- Download CAD model
You may also need…
-
-
-
-
-
-
CablesTNC to SMA Survey antenna cable
From 20,00€ This product has multiple variants. The options may be chosen on the product page
Description
Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.
Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units
Specifications
2B Survey Budget antenna
Antenna element
· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm
Electrical
· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2
Mechanical
· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male
Environmental
· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed
Documentation
Start here
Survey grade dual band (L1, L2/E5b/B2I) active GNSS antenna, calibrated by NGS, with TNC connector and 1.5m rugged cable terminated with SMA male. Ideal for surveying applications including PPK and post-processing. Also compatible with high end receivers from Novatel, Trimble, Leica, Topcon and others.
Good to know:
– Compatible with all simpleRTK2B boards as well as any other multiband GNSS receiver in the market.
– Shockproof gel ring at the perimeter of the antenna to minimize damage in case of fall
– Antenna calibration files can be downloaded from NGS website (Manufacturer: ArduSimple, Model: AS-ANT2B-CAL): https://www.ngs.noaa.gov/ANTCAL/index.xhtml#
Specifications
2B Survey Calibrated antennaAntenna element
- Supported positioning signal bands:
- GPS: L1, L2
- GLONASS: G1, G2
- BeiDou: B1, B2
- Galileo: E1, E5b
- QZSS: L1, L2
- SBAS: WAAS, EGNOS, MSAS and GAGAN
- Polarization: RHCP
- Peak gain: 5dBi
- Axial Ratio @ zenith: <3dB
- Azimuth Coverage: 360 degrees
- Impedance: 50 ohm
- Phase center error: ±1mm
- Calibration file available
- Supply voltage: 3-12V
- Typical supply current @ 3V: 45mA
- Average LNA gain: 40dB
- Maximum Noise Figure: 1.5dB
- Maximum VSWR: 2
- Maximum length: 152mm
- Weight: 400g
- Mounting style: Magnetic base (requires accessory) or 5/8” x 11TPI thread
- Connector: TNC female
- Cable length: Includes 1.5 meter cable terminated in SMA male
- Operating Temperature: -40 to +85°C
- Storage Temperature: -40 to +85°C
- IP Rating: IP67 (excluding air vent in screw hole, which can be sealed when installed)
- RoHS: Yes
Documentation
Start here:- Get started with the User Guide
- Datasheet
- Download CAD model
You may also need…
-
-
-
-
-
-
Cables
TNC to SMA Survey antenna cable
From 20,00€ This product has multiple variants. The options may be chosen on the product page
