Shipping to 
and 
Ground Plate for GNSS antenna
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.
8,20€
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 8,20€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– 1x Ground Plate for GNSS antenna
Enhance your experience, add to your cart:
-
Shield for Septentrio Native Ethernet
Original price was: 42,00€.38,00€Current price is: 38,00€.
Ground Plate for GNSS antenna
8,20€
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 8,20€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– 1x Ground Plate for GNSS antenna
Increase the performance, directivity and immunity to nearby noise with this ground plate optimized for GPS/GNSS antennas. Up to 3dBi more with u-blox ANN-MB antennas.
And the best, it only weights 80 grams!
Good to know:
– Includes mounting holes for simpleANT2B Helical, simpleANT3B Helical and u-blox ANN-MB antennas.
Specifications
- Diameter: 16cm
- Thickness: 1.6mm
- Weight: 81 grams
Documentation
Start here:
Datasheet- We didn't find time to create this 3D CAD model, contact us to request it
You may also need…
-
RTK starter kits
simpleRTK2B – Basic Starter Kit
From 211,00€ This product has multiple variants. The options may be chosen on the product page -
Sale!
Antennasu-blox GNSS Multiband antenna ANN-MB-00 (IP67)
Original price was: 54,00€.40,50€Current price is: 40,50€. -
-
Description
Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.
Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units
Specifications
2B Survey Budget antenna
Antenna element
· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm
Electrical
· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2
Mechanical
· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male
Environmental
· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed
Documentation
Start here
Increase the performance, directivity and immunity to nearby noise with this ground plate optimized for GPS/GNSS antennas. Up to 3dBi more with u-blox ANN-MB antennas.
And the best, it only weights 80 grams!
Good to know:
– Includes mounting holes for simpleANT2B Helical, simpleANT3B Helical and u-blox ANN-MB antennas.
Specifications
- Diameter: 16cm
- Thickness: 1.6mm
- Weight: 81 grams
Documentation
Start here:- Datasheet
- We didn't find time to create this 3D CAD model, contact us to request it
You may also need…
-
RTK starter kits
simpleRTK2B – Basic Starter Kit
From 211,00€ This product has multiple variants. The options may be chosen on the product page -
Sale!Antennas
u-blox GNSS Multiband antenna ANN-MB-00 (IP67)
Original price was: 54,00€.40,50€Current price is: 40,50€. -
-
