Shipping to 
and 
Inline GPS/GNSS Antenna Amplifier (L1/L2/L5/L6)
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.
126,00€
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 126,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– 1 Inline GNSS Antenna Amplifier (L1/L2/L5/L6)
Enhance your experience, add to your cart:
-
Shield for Septentrio Native Ethernet
Original price was: 42,00€.38,00€Current price is: 38,00€.
Inline GPS/GNSS Antenna Amplifier (L1/L2/L5/L6)
126,00€
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 126,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– 1 Inline GNSS Antenna Amplifier (L1/L2/L5/L6)
An inline amplifier is required when the antenna cable length attenuates the GNSS signal to a level below the receiver’s recommended minimum input level. With ArduSimple’s low loss antenna cables and antennas, this happens after 15-25m of cable between the antenna and the GNSS receiver. The exact maximum distance will depen on the model of antenna and receiver that you are using.
For example, if you would like to have a 40m cable between the antenna and the receiver, you will need to connect:
Antenna > 20m cable > Inline GPS/GNSS Antenna Amplifier > 20m cable > Receiver
This product is specially useful for rooftop antenna installations.
Good to know:
– The product comes with SMA female on the antenna side, and SMA male on the receiver side.
– This product is a cheaper alternative to Furuno BA-2670B.
Specifications
- Supported frequencies: L1 (1575 MHz), L2 (1227 MHz), L5 (1176 MHz), L6 (1278 MHz)
- Average gain: 20 dB
- Max Noise Figure: 2dB
- Max VSWR: 2dB
- Impedance: 50 ohm
- Input voltage range: 3 to 5.5V
- Current: 20mA
- Operating Temperature: -40 to +70deg
-
Weight: 70g
Documentation
Start here:
Datasheet- We didn't find time to create this 3D CAD model, contact us to request it
Description
Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.
Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units
Specifications
2B Survey Budget antenna
Antenna element
· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm
Electrical
· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2
Mechanical
· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male
Environmental
· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed
Documentation
Start here
An inline amplifier is required when the antenna cable length attenuates the GNSS signal to a level below the receiver’s recommended minimum input level. With ArduSimple’s low loss antenna cables and antennas, this happens after 15-25m of cable between the antenna and the GNSS receiver. The exact maximum distance will depen on the model of antenna and receiver that you are using.
For example, if you would like to have a 40m cable between the antenna and the receiver, you will need to connect:
Antenna > 20m cable > Inline GPS/GNSS Antenna Amplifier > 20m cable > Receiver
This product is specially useful for rooftop antenna installations.
Good to know:
– The product comes with SMA female on the antenna side, and SMA male on the receiver side.
– This product is a cheaper alternative to Furuno BA-2670B.
Specifications
- Supported frequencies: L1 (1575 MHz), L2 (1227 MHz), L5 (1176 MHz), L6 (1278 MHz)
- Average gain: 20 dB
- Max Noise Figure: 2dB
- Max VSWR: 2dB
- Impedance: 50 ohm
- Input voltage range: 3 to 5.5V
- Current: 20mA
- Operating Temperature: -40 to +70deg
-
Weight: 70g
Documentation
Start here:- Datasheet
- We didn't find time to create this 3D CAD model, contact us to request it
