Shipping to 
and 
simpleRTK2Blite – mPCIe Starter Kit
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.
249,00€
Out of stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 249,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
This product is not available as a set anymore, but you can create it with:
– 1 mPCIe adapter board
– 1 simpleRTK2Blite board
– 1 u-blox ANN-MB-00 Antenna for GNSS Dual Band with cable (IP67)
Enhance your experience, add to your cart:
-
Shield for Septentrio Native Ethernet
Original price was: 42,00€.38,00€Current price is: 38,00€.
simpleRTK2Blite – mPCIe Starter Kit
249,00€
Out of stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 249,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
This product is not available as a set anymore, but you can create it with:
– 1 mPCIe adapter board
– 1 simpleRTK2Blite board
– 1 u-blox ANN-MB-00 Antenna for GNSS Dual Band with cable (IP67)
Bring low cost high precision RTK GNSS positioning to your Mini PCI Express platforms with this adapter fully compatible with the simpleRTK2Blite board and u-blox ZED-F9P.
This kit:
- Connects ZED-F9P UART1 to your embedded computer or single board computer SBC using an FTDI converter.
- Powers your simpleRTK2Blite board directly from your mPCIe socket.
- You can add Bluetooth, WiFi or MR/LR radios on top of the simpleRTK2Blite for easy RTK corrections.
- You can also use this adapter to connect any XBee compatible device to your mPCIe socket.
If you are looking for an mPCIe or M.2 card with ZED-F9P soldered directly onto the PCB to meet the height requirements, you can also contact us.
You may also need…
Description
Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.
Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units
Specifications
2B Survey Budget antenna
Antenna element
· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm
Electrical
· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2
Mechanical
· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male
Environmental
· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed
Documentation
Start here
Bring low cost high precision RTK GNSS positioning to your Mini PCI Express platforms with this adapter fully compatible with the simpleRTK2Blite board and u-blox ZED-F9P.
This kit:
- Connects ZED-F9P UART1 to your embedded computer or single board computer SBC using an FTDI converter.
- Powers your simpleRTK2Blite board directly from your mPCIe socket.
- You can add Bluetooth, WiFi or MR/LR radios on top of the simpleRTK2Blite for easy RTK corrections.
- You can also use this adapter to connect any XBee compatible device to your mPCIe socket.
If you are looking for an mPCIe or M.2 card with ZED-F9P soldered directly onto the PCB to meet the height requirements, you can also contact us.
