Shipping to 
and 
Plastic Case for simpleRTK boards
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.
From 39,00€
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 39,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– 1 Plastic Case (check that you select the correct size for your board)
Enhance your experience, add to your cart:
-
Shield for Septentrio Native Ethernet
Original price was: 42,00€.38,00€Current price is: 38,00€.
Plastic Case for simpleRTK boards
From 39,00€
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 39,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– 1 Plastic Case (check that you select the correct size for your board)
Plastic case for simpleRTK2Blite, simpleRTK2B/3B and simpleRTK2B-SBC boards.
Non waterproof.
Plastic cases have no logo printed on it.
Good to know:
– It’s only the plastic case, doesn’t include electronics
– No need of screws to fix any of the receivers
– The simpleRTK2B/3B case comes with pre-cut holes for the LR, XLR radios and simpleRTK2B+heading kit SMA connectors. You can easily pierce these holes with a cutter.
simpleRTK2B Lite version can also fit inside the case:
– XBee to USB adapter
– BT module
– WiFi NTRIP master
– MR radio
You may also need…
Description
Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.
Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units
Specifications
2B Survey Budget antenna
Antenna element
· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm
Electrical
· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2
Mechanical
· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male
Environmental
· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed
Documentation
Start here
Plastic case for simpleRTK2Blite, simpleRTK2B/3B and simpleRTK2B-SBC boards.
Non waterproof.
Plastic cases have no logo printed on it.
Good to know:
– It’s only the plastic case, doesn’t include electronics
– No need of screws to fix any of the receivers
– The simpleRTK2B/3B case comes with pre-cut holes for the LR, XLR radios and simpleRTK2B+heading kit SMA connectors. You can easily pierce these holes with a cutter.
simpleRTK2B Lite version can also fit inside the case:
– XBee to USB adapter
– BT module
– WiFi NTRIP master
– MR radio
