LOGIN
Update (02/02/2026): We have plenty of stock of all our products, find us also in and    Shop now

Septentrio MosaicHAT

SKU: AS-OPENHW-MOSAICHAT

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.

From 648,00€

Special offer: the 2nd unit at 50% off

This product comes with 2 years worldwide warranty

This product has quantity discounts available:
Units Price per unit
<50
648,00€
>=50 Contact us for special pricing
>500 Contact us for special pricing

Includes:
– 1 Septentrio MosaicHAT board (Mosaic) manufactured by ArduSimple

Enhance your experience, add to your cart:
Septentrio mosaicHAT
Septentrio MosaicHAT dimensions
Septentrio mosaicHAT raspberryPI
Septentrio mosaicHAT back
Septentrio mosaicHAT
Septentrio MosaicHAT dimensions
Septentrio mosaicHAT raspberryPI
Septentrio mosaicHAT back

Septentrio MosaicHAT

SKU: AS-OPENHW-MOSAICHAT
In stock!

From 648,00€

payment-methods_ok-3.svg

This product comes with 2 years worldwide warranty

This product has quantity discounts available:
Units Price per unit
<50
648,00€
>=50 Contact us for special pricing
>500 Contact us for special pricing

Includes:
– 1 Septentrio MosaicHAT board (Mosaic) manufactured by ArduSimple

The mosaicHAT is an Open Source GPS/GNSS HW PCB HAT which integrates Septentrio’s Mosaic modules with basic communications and which can be stacked into a Raspberry Pi system.

ArduSimple manufactures the mosaicHAT receiver from Septentrio following the Open Source Hardware (OSHW) guidelines.

Good to know:
– This product is manufactured and sold by ArduSimple, but designed by Septentrio.
– This product is compatible but doesn’t include multiband GNSS antenna, which is necessary to use the product. Will not give good performance with a standard GNSS antenna, requires a multiband one.

AS-OPENHW-MOSAICHAT-H-00 AS-OPENHW-MOSAICHAT-X5-00 ASB-OPENHW-MOSAICHAT-H-00 ASB-OPENHW-MOSAICHAT-X5-00

Specifications

Mosaic-H features
  • Millimeter level precision
    1. <1cm with a base station up to 35km
    2. <1cm with NTRIP up to 35km
    3. <1.2m in standalone mode
    4. <0.6m standalone with SBAS coverage
  • GNSS attitude accuracy
    1. 1m antenna separation: 0.15deg heading, 0.25deg pitch/roll
    2. 5m antenna separation: 0.03deg heading, 0.05deg pitch/roll
  • Update rate
    1. Default: 1Hz
    2. Measurements only: up to 100Hz
    3. Standalone, SBAS, DGPS + attitude: up to 50Hz
    4. RTK+attitude: up to 20Hz
  • Multi band: L1, L2 and E5b support, 448 hardware channels
  • Multifrequency and Multiconstellation: 
    1. GPS: L1 L2
    2. GLONASS: L1 L2
    3. Galileo: E1 E5b
    4. BeiDou: B1 B2
    5. QZSS:  L1 L2
    6. SBAS: WAAS, EGNOS, MSAS, GAGAN, SDCM (L1)
  • Start-up times:
    1. Cold start: <45s
    2. Warm start: <20s
    3. Re-acquisition: 1s
  • Protocols:
    1. Septentrio Binary Format (SBF)
    2. NMEA 0183, v2.3, v3.03, v4.0
    3. RINEX v2.x, v3.x
    4. RTCM v2.x, v3.x (MSM included)
    5. CMR v2.0 (out/in), CMR+ (input only)
  • Interfaces (check user guide to verify which are available):
    • USB
    • UART
    • XBee
    • Timepulse
    • Event
  • Base and Rover functionality
  • Operating temperature Range: -40 to +85deg
  • Certification: CE, WEEE, ISO 9001-2015
  • Documentation: RED, RoHS
Mosaic-X5 features
  • Millimeter level precision
    1. <1cm with a base station up to 35km
    2. <1cm with NTRIP up to 35km
    3. <1.2m in standalone mode
    4. <0.6m standalone with SBAS coverage
  • Update rate
    1. Default: 1Hz
    2. With maximum performance: up to 100Hz
  • Multi band: L1, L2 and L5 support, 448 hardware channels
  • Multifrequency and Multiconstellation: 
    1. GPS: L1C/A L1PY L2C L2P L5
    2. GLONASS: L1CA L2CA L2P L3 CDMA
    3. Galileo: E1 E5a E5b E5 AltBloc E6
    4. BeiDou: B1I B1C B2a B2I B3
    5. QZSS:  L1C/A L2C L5
    6. Navic: L5
    7. SBAS: WAAS, EGNOS, MSAS, GAGAN, SDCM (L1 L5)
  • Start-up times:
    1. Cold start: <45s
    2. Warm start: <20s
    3. Re-acquisition: 1s
  • Protocols:
    1. Septentrio Binary Format (SBF)
    2. NMEA 0183, v2.3, v3.03, v4.0
    3. RINEX v2.x, v3.x
    4. RTCM v2.x, v3.x (MSM included)
    5. CMR v2.0 (out/in), CMR+ (input only)
  • Interfaces (check user guide to verify which are available):
    • USB
    • UART
    • XBee
    • Timepulse
    • Event
  • Base and Rover functionality
  • Operating temperature Range: -40 to +85deg
  • Certification: CE, WEEE, ISO 9001-2015
  • Documentation: RED, RoHS

Documentation

Start here:Certifications:Related tutorials:

You may also need…

Description

Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.

Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units

Specifications

2B Survey Budget antenna
Antenna element

· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm

Electrical

· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2

Mechanical

· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male

Environmental

· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed

Documentation

Start here

The mosaicHAT is an Open Source GPS/GNSS HW PCB HAT which integrates Septentrio’s Mosaic modules with basic communications and which can be stacked into a Raspberry Pi system.

ArduSimple manufactures the mosaicHAT receiver from Septentrio following the Open Source Hardware (OSHW) guidelines.

Good to know:
– This product is manufactured and sold by ArduSimple, but designed by Septentrio.
– This product is compatible but doesn’t include multiband GNSS antenna, which is necessary to use the product. Will not give good performance with a standard GNSS antenna, requires a multiband one.

AS-OPENHW-MOSAICHAT-H-00 AS-OPENHW-MOSAICHAT-X5-00 ASB-OPENHW-MOSAICHAT-H-00 ASB-OPENHW-MOSAICHAT-X5-00

Specifications

Mosaic-H features
  • Millimeter level precision
    1. <1cm with a base station up to 35km
    2. <1cm with NTRIP up to 35km
    3. <1.2m in standalone mode
    4. <0.6m standalone with SBAS coverage
  • GNSS attitude accuracy
    1. 1m antenna separation: 0.15deg heading, 0.25deg pitch/roll
    2. 5m antenna separation: 0.03deg heading, 0.05deg pitch/roll
  • Update rate
    1. Default: 1Hz
    2. Measurements only: up to 100Hz
    3. Standalone, SBAS, DGPS + attitude: up to 50Hz
    4. RTK+attitude: up to 20Hz
  • Multi band: L1, L2 and E5b support, 448 hardware channels
  • Multifrequency and Multiconstellation: 
    1. GPS: L1 L2
    2. GLONASS: L1 L2
    3. Galileo: E1 E5b
    4. BeiDou: B1 B2
    5. QZSS:  L1 L2
    6. SBAS: WAAS, EGNOS, MSAS, GAGAN, SDCM (L1)
  • Start-up times:
    1. Cold start: <45s
    2. Warm start: <20s
    3. Re-acquisition: 1s
  • Protocols:
    1. Septentrio Binary Format (SBF)
    2. NMEA 0183, v2.3, v3.03, v4.0
    3. RINEX v2.x, v3.x
    4. RTCM v2.x, v3.x (MSM included)
    5. CMR v2.0 (out/in), CMR+ (input only)
  • Interfaces (check user guide to verify which are available):
    • USB
    • UART
    • XBee
    • Timepulse
    • Event
  • Base and Rover functionality
  • Operating temperature Range: -40 to +85deg
  • Certification: CE, WEEE, ISO 9001-2015
  • Documentation: RED, RoHS
Mosaic-X5 features
  • Millimeter level precision
    1. <1cm with a base station up to 35km
    2. <1cm with NTRIP up to 35km
    3. <1.2m in standalone mode
    4. <0.6m standalone with SBAS coverage
  • Update rate
    1. Default: 1Hz
    2. With maximum performance: up to 100Hz
  • Multi band: L1, L2 and L5 support, 448 hardware channels
  • Multifrequency and Multiconstellation: 
    1. GPS: L1C/A L1PY L2C L2P L5
    2. GLONASS: L1CA L2CA L2P L3 CDMA
    3. Galileo: E1 E5a E5b E5 AltBloc E6
    4. BeiDou: B1I B1C B2a B2I B3
    5. QZSS:  L1C/A L2C L5
    6. Navic: L5
    7. SBAS: WAAS, EGNOS, MSAS, GAGAN, SDCM (L1 L5)
  • Start-up times:
    1. Cold start: <45s
    2. Warm start: <20s
    3. Re-acquisition: 1s
  • Protocols:
    1. Septentrio Binary Format (SBF)
    2. NMEA 0183, v2.3, v3.03, v4.0
    3. RINEX v2.x, v3.x
    4. RTCM v2.x, v3.x (MSM included)
    5. CMR v2.0 (out/in), CMR+ (input only)
  • Interfaces (check user guide to verify which are available):
    • USB
    • UART
    • XBee
    • Timepulse
    • Event
  • Base and Rover functionality
  • Operating temperature Range: -40 to +85deg
  • Certification: CE, WEEE, ISO 9001-2015
  • Documentation: RED, RoHS

Documentation

Start here:Certifications:Related tutorials:

You may also need…

Facebook-f X-twitter Icon-youtube-v Linkedin Github

Partners

Our Local Distributors

The vision of ArduSimple is to make GNSS RTK technology simple, affordable and accessible to everyone with a series of starter kits, tutorials, engineering services and OEM products.

Subscribe to our newsletter to get the latest updates

Products

Support

About ArduSimple

© 2026 ArduSimple – info@ardusimple.com
Legal notice | Privacy policy | Cookies policy

Got any questions or requests?
Contact us! We'll answer <24 hours!

ardusimple_logo_final_grey
Want to learn more about GPS/RTK?

If you are busy right now, our engineers will send you 3 short e-mails including all you need to know to start your project.