Shipping to 
and 
simpleGNSS - Basic Starter Kit
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.
Original price was: 99,00€.90,00€Current price is: 90,00€.
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 90,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– 1 simpleGNSS Pro board (NEO-F10N)
– 1 u-blox ANN-MB1-00 Antenna for GNSS Dual Band (L1/L5) with 5m cable (IP67)
Enhance your experience, add to your cart:
-
Shield for Septentrio Native Ethernet
Original price was: 42,00€.38,00€Current price is: 38,00€.
simpleGNSS - Basic Starter Kit
Original price was: 99,00€.90,00€Current price is: 90,00€.
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 90,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– 1 simpleGNSS Pro board (NEO-F10N)
– 1 u-blox ANN-MB1-00 Antenna for GNSS Dual Band (L1/L5) with 5m cable (IP67)
This standalone set of dual band (L1/L5) GNSS board based on u-blox NEO-F10N + u-blox ANN-MB1-00 antenna is everything that you need to achieve submeter level accuracy and evaluate dual band (L1/L5) GNSS technology at the most affordable cost.
It is fully compatible with Arduino, STM32 Nucleo, Raspberry Pi, Nvidia Jetson, ROS and Pixhawk / Ardupilot.
More details are available in the Specifications and Documentation tabs.
Good to know:
– This product is recommended if you want to evaluate u-blox NEO-F10N
Specifications
NEO-F10N features
- Sub meter level precision
- <1.5m in standalone mode
- <0.9m standalone with SBAS coverage
- Update rate
- Default: 1Hz
- With maximum performance: up to 8Hz
- With reduced performance: up to 10Hz
- Multi band: L1, L5 support
- Multifrequency and Multiconstellation:
- GPS: L1C/A L5
- GLONASS: L1OF
- Galileo: E1-B/C E5a
- BeiDou: B1C B2I
- NavIC: SPS-L5
- QZSS: L1Sb
- SBAS: WAAS, EGNOS, MSAS, GAGAN and SouthPan
- Start-up times:
- First position fix: 27 seconds (cold), 2 seconds (hot)
- Operating temperature Range: -40 to +85deg
- Documentation: RED, RoHS, UKCA
Documentation
Start here:- Get started with the User Guide
- Check the Antenna Installation Guide
Datasheet- We didn't find time to create this 3D CAD model, contact us to request it
You may also need…
-
-
-
-
-
AccessoriesPlastic Case for simpleRTK boards
From 39,00€ This product has multiple variants. The options may be chosen on the product page -
Description
Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.
Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units
Specifications
2B Survey Budget antenna
Antenna element
· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm
Electrical
· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2
Mechanical
· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male
Environmental
· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed
Documentation
Start here
This standalone set of dual band (L1/L5) GNSS board based on u-blox NEO-F10N + u-blox ANN-MB1-00 antenna is everything that you need to achieve submeter level accuracy and evaluate dual band (L1/L5) GNSS technology at the most affordable cost.
It is fully compatible with Arduino, STM32 Nucleo, Raspberry Pi, Nvidia Jetson, ROS and Pixhawk / Ardupilot.
More details are available in the Specifications and Documentation tabs.
Good to know:
– This product is recommended if you want to evaluate u-blox NEO-F10N
Specifications
NEO-F10N features
- Sub meter level precision
- <1.5m in standalone mode
- <0.9m standalone with SBAS coverage
- Update rate
- Default: 1Hz
- With maximum performance: up to 8Hz
- With reduced performance: up to 10Hz
- Multi band: L1, L5 support
- Multifrequency and Multiconstellation:
- GPS: L1C/A L5
- GLONASS: L1OF
- Galileo: E1-B/C E5a
- BeiDou: B1C B2I
- NavIC: SPS-L5
- QZSS: L1Sb
- SBAS: WAAS, EGNOS, MSAS, GAGAN and SouthPan
- Start-up times:
- First position fix: 27 seconds (cold), 2 seconds (hot)
- Operating temperature Range: -40 to +85deg
- Documentation: RED, RoHS, UKCA
Documentation
Start here:- Get started with the User Guide
- Check the Antenna Installation Guide
- Datasheet
- We didn't find time to create this 3D CAD model, contact us to request it
You may also need…
-
-
-
-
-
Accessories
Plastic Case for simpleRTK boards
From 39,00€ This product has multiple variants. The options may be chosen on the product page -
