Shipping to 
and 
simpleGNSS Pro
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.
From 49,00€
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 49,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– 1 simpleGNSS Pro board (NEO-F10N)
Enhance your experience, add to your cart:
-
Shield for Septentrio Native Ethernet
Original price was: 42,00€.38,00€Current price is: 38,00€.
simpleGNSS Pro
From 49,00€
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 49,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– 1 simpleGNSS Pro board (NEO-F10N)
simpleGNSS Pro allows you to evaluate sub-meter dual band (L1/L5) GNSS positioning technology. It’s based on u-blox NEO-F10N and can be used standalone. Or connected with Arduino, Ardupilot / Pixhawk (JST connector), Raspberry Pi, Nvidia, STM32 and ESP32 platforms, as a shield. It can provide up to 10 positions every second.
This board is ideal for vehicle and object tracking, especially if you need to improve the GPS accuracy from the traditional 2-3 meters to sub 1 meter.
More details available in the Specification and Documentation tabs.
Good to know:
– This product doesn’t do RTK.
– This product is compatible but doesn’t include multiband GNSS antenna, which is necessary to use the product.
– The module will not give best performance with any GNSS antenna, for optimum performance we recommend our Budget Survey Tripleband or ANN-MB1 antenna.
– This board is recommended if you want to test u-blox NEO-F10N performance.
– The onboard XBee socket can be used to expand functionality with Plugin accessories (MR/LR/XLR radios, Bluetooth, Ethernet, WiFi, RS232, Canbus, L-Band, 4G/3G/2G).
– Compatible with Ardusimple plastic case
– Ardupilot compatible via JST-GH standard connector
– Timepulse output and Event input
– This product is a cheaper alternative including better accuracy to boards with NEO-M9N
Specification
NEO-F10N features- Sub meter level precision
- <1.5m in standalone mode
- <0.9m standalone with SBAS coverage
- Update rate
- Default: 1Hz
- With maximum performance: up to 8Hz
- With reduced performance: up to 10Hz
- Multi band: L1, L5 support
- Multifrequency and Multiconstellation:
- GPS: L1C/A L5
- Galileo: E1-B/C E5a
- BeiDou: B1C B2I
- NavIC: SPS-L5
- QZSS: L1Sb
- SBAS: WAAS, EGNOS, MSAS, GAGAN and SouthPan
- Start-up times:
- First position fix: 27 seconds (cold), 2 seconds (hot)
- Operating temperature Range: -40 to +85deg
- Documentation: RED, RoHS, UKCA
Documentation
Start here:- Get started with the User Guide
Datasheet- We didn't find time to create this 3D CAD model, contact us to request it
You may also need…
Description
Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.
Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units
Specifications
2B Survey Budget antenna
Antenna element
· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm
Electrical
· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2
Mechanical
· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male
Environmental
· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed
Documentation
Start here
simpleGNSS Pro allows you to evaluate sub-meter dual band (L1/L5) GNSS positioning technology. It’s based on u-blox NEO-F10N and can be used standalone. Or connected with Arduino, Ardupilot / Pixhawk (JST connector), Raspberry Pi, Nvidia, STM32 and ESP32 platforms, as a shield. It can provide up to 10 positions every second.
This board is ideal for vehicle and object tracking, especially if you need to improve the GPS accuracy from the traditional 2-3 meters to sub 1 meter.
More details available in the Specification and Documentation tabs.
Good to know:
– This product doesn’t do RTK.
– This product is compatible but doesn’t include multiband GNSS antenna, which is necessary to use the product.
– The module will not give best performance with any GNSS antenna, for optimum performance we recommend our Budget Survey Tripleband or ANN-MB1 antenna.
– This board is recommended if you want to test u-blox NEO-F10N performance.
– The onboard XBee socket can be used to expand functionality with Plugin accessories (MR/LR/XLR radios, Bluetooth, Ethernet, WiFi, RS232, Canbus, L-Band, 4G/3G/2G).
– Compatible with Ardusimple plastic case
– Ardupilot compatible via JST-GH standard connector
– Timepulse output and Event input
– This product is a cheaper alternative including better accuracy to boards with NEO-M9N
Specification
NEO-F10N features- Sub meter level precision
- <1.5m in standalone mode
- <0.9m standalone with SBAS coverage
- Update rate
- Default: 1Hz
- With maximum performance: up to 8Hz
- With reduced performance: up to 10Hz
- Multi band: L1, L5 support
- Multifrequency and Multiconstellation:
- GPS: L1C/A L5
- Galileo: E1-B/C E5a
- BeiDou: B1C B2I
- NavIC: SPS-L5
- QZSS: L1Sb
- SBAS: WAAS, EGNOS, MSAS, GAGAN and SouthPan
- Start-up times:
- First position fix: 27 seconds (cold), 2 seconds (hot)
- Operating temperature Range: -40 to +85deg
- Documentation: RED, RoHS, UKCA
Documentation
Start here:- Get started with the User Guide
- Datasheet
- We didn't find time to create this 3D CAD model, contact us to request it
