Shipping to 
United States (USA)
and 
RTK Portable Bluetooth Kit
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.
Original price was: 275,00€.247,50€Current price is: 247,50€.
Availability: In stock
This product comes with 2 years worldwide warranty
Includes:
– ZED-F9P RTK receiver with USB and Bluetooth inside a plastic case
– 1 u-blox GNSS Multiband antenna ANN-MB-00 (IP67) with 5m cable with SMA connector
– 1 USB – type C cable
– Pre-configuration to send NMEA over Bluetooth and USB at the same time at 1Hz
Enhance your experience, add to your cart:
-
Shield for Septentrio Native Ethernet
Original price was: 42,00€.38,00€Current price is: 38,00€.
RTK Portable Bluetooth Kit
Original price was: 275,00€.247,50€Current price is: 247,50€.
Availability: In stock
This product comes with 2 years worldwide warranty
Includes:
– ZED-F9P RTK receiver with USB and Bluetooth inside a plastic case
– 1 u-blox GNSS Multiband antenna ANN-MB-00 (IP67) with 5m cable with SMA connector
– 1 USB – type C cable
– Pre-configuration to send NMEA over Bluetooth and USB at the same time at 1Hz
ZED-F9P RTK receiver and antenna with USB and Bluetooth inside a plastic case. Everything is pre-packed and pre-configured so you can start using it from the unboxing.
This kit is ideal if you plan to use NTRIP corrections to achieve cm level positioning, it can be easily connected to a smartphone/tablet/computer via USB or Bluetooth.
Good to know:
– The plastic case can be attached to any surface with 2 M4 screws, we recommend using washers to don’t damage the plastic and apply moderate torque
– The plastic case is not waterproof
– The plastic case can be manually opened in case you want to play with its insides, don’t use any tool and do it carefully 
– Compatible with smartphones, computers and other devices that support Bluetooth 2.0 (Android only)
– If you want to connect this product via USB (and not Bluetooth) to a mobile phone or tablet, you will need an OTG cable. You will find this cable in the related products at the end of this page.
– The ZED-F9P is pre-configured to work at 115’200bps (this information is useful in case you want to connect with a PC)
Product Change History:
– AS-STARTKIT-BTCASE-L1L2-0-00: initial version
– AS-STARTKIT-BTCASE-L1L2-0-01: removed ArduSimple logo from plastic case
– AS-STARTKIT-BTCASE-L1L2-0-02: changed connector system from Mini-USB to USB-C
– AS-STARTKIT-BTCASE-L1L2-0-03: default ZED-F9P and Bluetooth baudrate set at 115’200bps
You may also need…
-
-
-
-
AccessoriesWaterproof Transport Case IP67
From 59,00€ This product has multiple variants. The options may be chosen on the product page -
-
Description
Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.
Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units
Specifications
2B Survey Budget antenna
Antenna element
· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm
Electrical
· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2
Mechanical
· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male
Environmental
· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed
Documentation
Start here
ZED-F9P RTK receiver and antenna with USB and Bluetooth inside a plastic case. Everything is pre-packed and pre-configured so you can start using it from the unboxing.
This kit is ideal if you plan to use NTRIP corrections to achieve cm level positioning, it can be easily connected to a smartphone/tablet/computer via USB or Bluetooth.
Good to know:
– The plastic case can be attached to any surface with 2 M4 screws, we recommend using washers to don’t damage the plastic and apply moderate torque
– The plastic case is not waterproof
– The plastic case can be manually opened in case you want to play with its insides, don’t use any tool and do it carefully
– Compatible with smartphones, computers and other devices that support Bluetooth 2.0 (Android only)
– If you want to connect this product via USB (and not Bluetooth) to a mobile phone or tablet, you will need an OTG cable. You will find this cable in the related products at the end of this page.
– The ZED-F9P is pre-configured to work at 115’200bps (this information is useful in case you want to connect with a PC)
Product Change History:
– AS-STARTKIT-BTCASE-L1L2-0-00: initial version
– AS-STARTKIT-BTCASE-L1L2-0-01: removed ArduSimple logo from plastic case
– AS-STARTKIT-BTCASE-L1L2-0-02: changed connector system from Mini-USB to USB-C
– AS-STARTKIT-BTCASE-L1L2-0-03: default ZED-F9P and Bluetooth baudrate set at 115’200bps
You may also need…
-
-
-
-
Accessories
Waterproof Transport Case IP67
From 59,00€ This product has multiple variants. The options may be chosen on the product page -
-
