LOGIN
Update (31/10/2025): We have plenty of stock of all our products, find us also in and    Shop now

simpleRTK3B mPCIe

SKU: AS-RTK3B-MPCIE

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.

From 575,00€

This product comes with 2 years worldwide warranty

This product has quantity discounts available:
Units Price per unit
<50
575,00€
>=50 Contact us for special pricing
>500 Contact us for special pricing

Includes:
– 1 simpleRTK3B mPCIe board

Enhance your experience, add to your cart:
mosaicX5 mpcie top
simpleRTK3B mPCIe dimensions
mosaicX5 mpcie bottom
mosaicX5 mpcie perspective
pinout-simpleRTK3B_mPCIe-R00
mosaicX5 mpcie top
simpleRTK3B mPCIe dimensions
mosaicX5 mpcie bottom
mosaicX5 mpcie perspective
pinout-simpleRTK3B_mPCIe-R00

simpleRTK3B mPCIe

SKU: AS-RTK3B-MPCIE
In stock!

From 575,00€

payment-methods_ok-3.svg

This product comes with 2 years worldwide warranty

This product has quantity discounts available:
Units Price per unit
<50
575,00€
>=50 Contact us for special pricing
>500 Contact us for special pricing

Includes:
– 1 simpleRTK3B mPCIe board

Bring low cost high precision RTK GNSS positioning to your Mini PCI Express platforms thanks to Septentrio Mosaic and this board fully compatible with MiniPCIe full-size sockets.

Good to know:
– You will need a uFL to SMA pigtail to connect it to our Multiband GPS/GNSS antennas.
– Bulk pricing starting 50 units

AS-RTK3B-MPCIE-L1L2-MH-00 AS-RTK3B-MPCIE-L125-MX5-00

Specifications

Mosaic-H features
  • Millimeter level precision
    1. <1cm with a base station up to 35km
    2. <1cm with NTRIP up to 35km
    3. <1.2m in standalone mode
    4. <0.6m standalone with SBAS coverage
  • GNSS attitude accuracy
    1. 1m antenna separation: 0.15deg heading, 0.25deg pitch/roll
    2. 5m antenna separation: 0.03deg heading, 0.05deg pitch/roll
  • Update rate
    1. Default: 1Hz
    2. Measurements only: up to 100Hz
    3. Standalone, SBAS, DGPS + attitude: up to 50Hz
    4. RTK+attitude: up to 20Hz
  • Multi band: L1, L2 and E5b support, 448 hardware channels
  • Multifrequency and Multiconstellation: 
    1. GPS: L1 L2
    2. GLONASS: L1 L2
    3. Galileo: E1 E5b
    4. BeiDou: B1 B2
    5. QZSS:  L1 L2
    6. SBAS: WAAS, EGNOS, MSAS, GAGAN, SDCM (L1)
  • Start-up times:
    1. Cold start: <45s
    2. Warm start: <20s
    3. Re-acquisition: 1s
  • Protocols:
    1. Septentrio Binary Format (SBF)
    2. NMEA 0183, v2.3, v3.03, v4.0
    3. RINEX v2.x, v3.x
    4. RTCM v2.x, v3.x (MSM included)
    5. CMR v2.0 (out/in), CMR+ (input only)
  • Interfaces (check user guide to verify which are available):
    • USB
    • UART
    • XBee
    • Timepulse
    • Event
  • Base and Rover functionality
  • Operating temperature Range: -40 to +85deg
  • Certification: CE, WEEE, ISO 9001-2015
  • Documentation: RED, RoHS
Mosaic-X5 features
  • Millimeter level precision
    1. <1cm with a base station up to 35km
    2. <1cm with NTRIP up to 35km
    3. <1.2m in standalone mode
    4. <0.6m standalone with SBAS coverage
  • Update rate
    1. Default: 1Hz
    2. With maximum performance: up to 100Hz
  • Multi band: L1, L2 and L5 support, 448 hardware channels
  • Multifrequency and Multiconstellation: 
    1. GPS: L1C/A L1PY L2C L2P L5
    2. GLONASS: L1CA L2CA L2P L3 CDMA
    3. Galileo: E1 E5a E5b E5 AltBloc E6
    4. BeiDou: B1I B1C B2a B2I B3
    5. QZSS:  L1C/A L2C L5
    6. Navic: L5
    7. SBAS: WAAS, EGNOS, MSAS, GAGAN, SDCM (L1 L5)
  • Start-up times:
    1. Cold start: <45s
    2. Warm start: <20s
    3. Re-acquisition: 1s
  • Protocols:
    1. Septentrio Binary Format (SBF)
    2. NMEA 0183, v2.3, v3.03, v4.0
    3. RINEX v2.x, v3.x
    4. RTCM v2.x, v3.x (MSM included)
    5. CMR v2.0 (out/in), CMR+ (input only)
  • Interfaces (check user guide to verify which are available):
    • USB
    • UART
    • XBee
    • Timepulse
    • Event
  • Base and Rover functionality
  • Operating temperature Range: -40 to +85deg
  • Certification: CE, WEEE, ISO 9001-2015
  • Documentation: RED, RoHS

Documentation

Start here:Certifications:Related tutorials:

You may also need…

Description

Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.

Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units

Specifications

2B Survey Budget antenna
Antenna element

· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm

Electrical

· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2

Mechanical

· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male

Environmental

· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed

Documentation

Start here

Bring low cost high precision RTK GNSS positioning to your Mini PCI Express platforms thanks to Septentrio Mosaic and this board fully compatible with MiniPCIe full-size sockets.

Good to know:
– You will need a uFL to SMA pigtail to connect it to our Multiband GPS/GNSS antennas.
– Bulk pricing starting 50 units

AS-RTK3B-MPCIE-L1L2-MH-00 AS-RTK3B-MPCIE-L125-MX5-00

Specifications

Mosaic-H features
  • Millimeter level precision
    1. <1cm with a base station up to 35km
    2. <1cm with NTRIP up to 35km
    3. <1.2m in standalone mode
    4. <0.6m standalone with SBAS coverage
  • GNSS attitude accuracy
    1. 1m antenna separation: 0.15deg heading, 0.25deg pitch/roll
    2. 5m antenna separation: 0.03deg heading, 0.05deg pitch/roll
  • Update rate
    1. Default: 1Hz
    2. Measurements only: up to 100Hz
    3. Standalone, SBAS, DGPS + attitude: up to 50Hz
    4. RTK+attitude: up to 20Hz
  • Multi band: L1, L2 and E5b support, 448 hardware channels
  • Multifrequency and Multiconstellation: 
    1. GPS: L1 L2
    2. GLONASS: L1 L2
    3. Galileo: E1 E5b
    4. BeiDou: B1 B2
    5. QZSS:  L1 L2
    6. SBAS: WAAS, EGNOS, MSAS, GAGAN, SDCM (L1)
  • Start-up times:
    1. Cold start: <45s
    2. Warm start: <20s
    3. Re-acquisition: 1s
  • Protocols:
    1. Septentrio Binary Format (SBF)
    2. NMEA 0183, v2.3, v3.03, v4.0
    3. RINEX v2.x, v3.x
    4. RTCM v2.x, v3.x (MSM included)
    5. CMR v2.0 (out/in), CMR+ (input only)
  • Interfaces (check user guide to verify which are available):
    • USB
    • UART
    • XBee
    • Timepulse
    • Event
  • Base and Rover functionality
  • Operating temperature Range: -40 to +85deg
  • Certification: CE, WEEE, ISO 9001-2015
  • Documentation: RED, RoHS
Mosaic-X5 features
  • Millimeter level precision
    1. <1cm with a base station up to 35km
    2. <1cm with NTRIP up to 35km
    3. <1.2m in standalone mode
    4. <0.6m standalone with SBAS coverage
  • Update rate
    1. Default: 1Hz
    2. With maximum performance: up to 100Hz
  • Multi band: L1, L2 and L5 support, 448 hardware channels
  • Multifrequency and Multiconstellation: 
    1. GPS: L1C/A L1PY L2C L2P L5
    2. GLONASS: L1CA L2CA L2P L3 CDMA
    3. Galileo: E1 E5a E5b E5 AltBloc E6
    4. BeiDou: B1I B1C B2a B2I B3
    5. QZSS:  L1C/A L2C L5
    6. Navic: L5
    7. SBAS: WAAS, EGNOS, MSAS, GAGAN, SDCM (L1 L5)
  • Start-up times:
    1. Cold start: <45s
    2. Warm start: <20s
    3. Re-acquisition: 1s
  • Protocols:
    1. Septentrio Binary Format (SBF)
    2. NMEA 0183, v2.3, v3.03, v4.0
    3. RINEX v2.x, v3.x
    4. RTCM v2.x, v3.x (MSM included)
    5. CMR v2.0 (out/in), CMR+ (input only)
  • Interfaces (check user guide to verify which are available):
    • USB
    • UART
    • XBee
    • Timepulse
    • Event
  • Base and Rover functionality
  • Operating temperature Range: -40 to +85deg
  • Certification: CE, WEEE, ISO 9001-2015
  • Documentation: RED, RoHS

Documentation

Start here:Certifications:Related tutorials:

You may also need…

Facebook-f X-twitter Icon-youtube-v Linkedin Github

Partners

Our Local Distributors

The vision of ArduSimple is to make GNSS RTK technology simple, affordable and accessible to everyone with a series of starter kits, tutorials, engineering services and OEM products.

Subscribe to our newsletter to get the latest updates

Products

Support

About ArduSimple

© 2025 ArduSimple – info@ardusimple.com
Legal notice | Privacy policy | Cookies policy

Got any questions or requests?
Contact us! We'll answer <24 hours!

Want to learn more about GPS/RTK?

1. Our engineering team will contact you to solve any questions
2. We will keep you updated about promotions and new product releases
3.You will only hear from us when we have important news, we won’t spam your email