Shipping to 
and 
GPS-RTK2
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.
Original price was: 209,00€.199,00€Current price is: 199,00€.
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 199,00€ |
| >=50 | 190,20€ Click here for bulk orders |
| >500 | Contact us for special pricing |
Includes:
– 1 SparkFun GPS-RTK2 Board (ZED-F9P) (Qwiic) manufactured by ArduSimple.
Enhance your experience, add to your cart:
-
Shield for Septentrio Native Ethernet
Original price was: 42,00€.38,00€Current price is: 38,00€.
GPS-RTK2
Original price was: 209,00€.199,00€Current price is: 199,00€.
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 199,00€ |
| >=50 | 190,20€ Click here for bulk orders |
| >500 | Contact us for special pricing |
Includes:
– 1 SparkFun GPS-RTK2 Board (ZED-F9P) (Qwiic) manufactured by ArduSimple.
ArduSimple manufactures the SparkFun GPS-RTK2 Board – ZED-F9P (Qwiic) GNSS receiver following the Open Source Hardware (OSHW) guidelines.
ArduSimple has not any relation with SparkFun, in case of any issues, warranty is provided by ArduSimple.
Check out GPS-RTK2 page to learn more.
Good to know:
– This product is manufactured and sold by ArduSimple, designed by Sparkfun.
– This product is the same as part number GPS-15136.
– You are allowed to sale your version of this board (as is or with modifications)
– This product is compatible but doesn’t include multiband GNSS antenna, which is necessary to use the product. The module will not give good performance with a standard GNSS antenna, requires a multiband one.
Specifications
ZED-F9P features- Centimeter level precision
- <1cm with a base station up to 35km
- <1cm with NTRIP up to 35km
- <4cm with SSR corrections
- <1.5m in standalone mode
- <0.9m standalone with SBAS coverage
- Update rate
- Default: 1Hz
- With maximum performance: up to 10Hz
- With reduced performance: up to 20Hz
- Multi band: L1, L2 and E5b support
- Multifrequency and Multiconstellation:
- GPS: L1C/A L2C
- GLONASS: L1OF L2OF
- Galileo: E1-B/C E5b
- BeiDou: B1I B2I
- QZSS: L1C/A L2C
- SBAS: WAAS, EGNOS, MSAS, GAGAN and SouthPAN
- Start-up times:
- First position fix: 25 seconds (cold), 2 seconds (hot)
- First RTK fix: 35 seconds (cold)
- RAW data output in UBX format
- Base and Rover functionality
- Operating temperature Range: -40 to +85deg
- Documentation: RED, RoHS
Documentation
Start here:
Datasheet- Configuration files
- We didn't find time to create this 3D CAD model, contact us to request it
You may also need…
-
RTK starter kits
simpleRTK2B – Basic Starter Kitdgfhdh
From 237,00€ This product has multiple variants. The options may be chosen on the product page -
RTK2B Boards
simpleRTK2B Budget
From 172,00€ This product has multiple variants. The options may be chosen on the product page -
RTK2B Boards
simpleRTK2B Pro
From 226,00€ This product has multiple variants. The options may be chosen on the product page -
Sale!
Antennasu-blox GNSS Multiband antenna ANN-MB-00 (IP67)
Original price was: 54,00€.40,50€Current price is: 40,50€. -
-
Description
Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.
Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units
Specifications
2B Survey Budget antenna
Antenna element
· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm
Electrical
· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2
Mechanical
· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male
Environmental
· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed
Documentation
Start here
ArduSimple manufactures the SparkFun GPS-RTK2 Board – ZED-F9P (Qwiic) GNSS receiver following the Open Source Hardware (OSHW) guidelines.
ArduSimple has not any relation with SparkFun, in case of any issues, warranty is provided by ArduSimple.
Check out GPS-RTK2 page to learn more.
Good to know:
– This product is manufactured and sold by ArduSimple, designed by Sparkfun.
– This product is the same as part number GPS-15136.
– You are allowed to sale your version of this board (as is or with modifications)
– This product is compatible but doesn’t include multiband GNSS antenna, which is necessary to use the product. The module will not give good performance with a standard GNSS antenna, requires a multiband one.
Specifications
ZED-F9P features- Centimeter level precision
- <1cm with a base station up to 35km
- <1cm with NTRIP up to 35km
- <4cm with SSR corrections
- <1.5m in standalone mode
- <0.9m standalone with SBAS coverage
- Update rate
- Default: 1Hz
- With maximum performance: up to 10Hz
- With reduced performance: up to 20Hz
- Multi band: L1, L2 and E5b support
- Multifrequency and Multiconstellation:
- GPS: L1C/A L2C
- GLONASS: L1OF L2OF
- Galileo: E1-B/C E5b
- BeiDou: B1I B2I
- QZSS: L1C/A L2C
- SBAS: WAAS, EGNOS, MSAS, GAGAN and SouthPAN
- Start-up times:
- First position fix: 25 seconds (cold), 2 seconds (hot)
- First RTK fix: 35 seconds (cold)
- RAW data output in UBX format
- Base and Rover functionality
- Operating temperature Range: -40 to +85deg
- Documentation: RED, RoHS
Documentation
Start here:- Datasheet
- Configuration files
- We didn't find time to create this 3D CAD model, contact us to request it
You may also need…
-
RTK starter kits
simpleRTK2B – Basic Starter Kitdgfhdh
From 237,00€ This product has multiple variants. The options may be chosen on the product page -
RTK2B Boards
simpleRTK2B Budget
From 172,00€ This product has multiple variants. The options may be chosen on the product page -
RTK2B Boards
simpleRTK2B Pro
From 226,00€ This product has multiple variants. The options may be chosen on the product page -
Sale!Antennas
u-blox GNSS Multiband antenna ANN-MB-00 (IP67)
Original price was: 54,00€.40,50€Current price is: 40,50€. -
-
