Shipping to 
and 
Magnetic Stand for Survey GNSS Antenna
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.
18,00€
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 18,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– Stand for survey multiband external GNSS antenna with magnetic base
Enhance your experience, add to your cart:
-
Shield for Septentrio Native Ethernet
Original price was: 42,00€.38,00€Current price is: 38,00€.
Magnetic Stand for Survey GNSS Antenna
18,00€
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 18,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– Stand for survey multiband external GNSS antenna with magnetic base
Stand for survey multiband GNSS antennas with magnetic base.
Good to know:
– Uses standard 5/8” thread
– Compatible with all ArduSimple Survey GNSS antennas
– Strong magnetic base
– Does not include the antenna
Specifications
5/8''-11 thread mountDocumentation
Start here:
Datasheet- We didn't find time to create this 3D CAD model, contact us to request it
You may also need…
-
-
-
-
-
-
CablesSMA antenna RF cable extender
From 13,00€ This product has multiple variants. The options may be chosen on the product page
Description
Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.
Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units
Specifications
2B Survey Budget antenna
Antenna element
· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm
Electrical
· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2
Mechanical
· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male
Environmental
· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed
Documentation
Start here
Stand for survey multiband GNSS antennas with magnetic base.
Good to know:
– Uses standard 5/8” thread
– Compatible with all ArduSimple Survey GNSS antennas
– Strong magnetic base
– Does not include the antenna
Specifications
5/8''-11 thread mountDocumentation
Start here:- Datasheet
- We didn't find time to create this 3D CAD model, contact us to request it
You may also need…
-
-
-
-
-
-
Cables
SMA antenna RF cable extender
From 13,00€ This product has multiple variants. The options may be chosen on the product page
