Shipping to 
and 
Tablet holder
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.
119,00€
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 119,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– Tablet holder for tablets between 19cm and 26cm length, including soft rubber pads to prevent the tablet to slip, ideal for harsh environments
– Metal sphere, “U” rods, washer and nuts to fix to the surveying pole
– Metal sphere, nuts and bolts to fix to the tablet holder
– Metal arm with hand actioned spring to position tablet holder as desired without any tools
– Custom plate to attach to the tablet holder
– 4 reusable plastic rivets to fix simpleRTK2B/3B/lite plastic cases to the tablet holder custom plate
Enhance your experience, add to your cart:
-
Shield for Septentrio Native Ethernet
Original price was: 42,00€.38,00€Current price is: 38,00€.
Tablet holder
119,00€
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 119,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– Tablet holder for tablets between 19cm and 26cm length, including soft rubber pads to prevent the tablet to slip, ideal for harsh environments
– Metal sphere, “U” rods, washer and nuts to fix to the surveying pole
– Metal sphere, nuts and bolts to fix to the tablet holder
– Metal arm with hand actioned spring to position tablet holder as desired without any tools
– Custom plate to attach to the tablet holder
– 4 reusable plastic rivets to fix simpleRTK2B/3B/lite plastic cases to the tablet holder custom plate
Robust tablet holder to attach your preferred tablet to a surveyor pole.
This holder is 100% compatible with simpleRTK2B/3B/lite plastic cases that can be attached to it in different positions.
This kit does not include the tools to install it (Phillips screwdriver and wrench)
Good to know:
– The tablet is not included, this product is only a holder for a tablet.
Documentation
Start here:
Datasheet- We didn't find time to create this 3D CAD model, contact us to request it
You may also need…
-
Sale!
Accessories4 Section Pole for survey GNSS antenna
Original price was: 149,00€.139,00€Current price is: 139,00€. -
Sale!
Made in EuropeProfessionalRTK Portable Bluetooth Kit
Original price was: 275,00€.247,50€Current price is: 247,50€. -
-
Description
Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.
Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units
Specifications
2B Survey Budget antenna
Antenna element
· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm
Electrical
· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2
Mechanical
· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male
Environmental
· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed
Documentation
Start here
Robust tablet holder to attach your preferred tablet to a surveyor pole.
This holder is 100% compatible with simpleRTK2B/3B/lite plastic cases that can be attached to it in different positions.
This kit does not include the tools to install it (Phillips screwdriver and wrench)
Good to know:
– The tablet is not included, this product is only a holder for a tablet.
Documentation
Start here:- Datasheet
- We didn't find time to create this 3D CAD model, contact us to request it
You may also need…
-
Sale!Accessories
4 Section Pole for survey GNSS antenna
Original price was: 149,00€.139,00€Current price is: 139,00€. -
Sale!Made in EuropeProfessional
RTK Portable Bluetooth Kit
Original price was: 275,00€.247,50€Current price is: 247,50€. -
-
