Shipping to 
and 
WiFi NTRIP Master
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.
66,00€
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 66,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– WiFi radio module including NTRIP software (XBee socket compatible)
Enhance your experience, add to your cart:
-
Shield for Septentrio Native Ethernet
Original price was: 42,00€.38,00€Current price is: 38,00€.
WiFi NTRIP Master
66,00€
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 66,00€ |
| >=50 | Contact us for special pricing |
| >500 | Contact us for special pricing |
Includes:
– WiFi radio module including NTRIP software (XBee socket compatible)
The ArduSimple WiFi NTRIP Master enables your RTK receiver to connect autonomouly to internet, by using any WiFi network, and without the need of a PC. No programming is required to use this product. The device also creates its own Wi-Fi, which allows you to access a web interface for configuration.
You can use this product to:
– Connect your GPS receiver to NTRIP RTK correction service, using its integrated NTRIP server/caster/client functionality
– Transport a serial port stream over Wi-Fi or internet, using its integrated TCP/UDP sockets
Good to know:
– If your Wi-Fi network has internet access, the WiFi NTRIP Master will also then have internet access. Or you can turn on the hotspot feature on your phone
– Default configuration is at 115’200bps
– Compatible with all ArduSimple products or any board with XBee socket
– Integrated WiFi antenna (contact us for external antenna variant)
– It’s open source and you can find the design files and source code in GitHub: https://github.com/nebkat/esp32-xbee/releases
– It is the same hardware as the BLE Bridge so you can also use it for that purpose (by changing the firmware)
Specifications
Interfaces- UART (3.3V)
- RS232 (requires accessory)
- Wi-Fi 2.4GHz
- Wi-Fi compliant with 802.11 b/g/n
- Onboard Wi-Fi antenna (contact us for option with uFL connector)
- Operating voltage: 3.0V to 3.6V
- Operating current: typically 80 mA (up to 500mA peak)
- Operating temperature Range: -40 to +85deg
- Simultaneous Wi-Fi Station and Wi-Fi Hotspot
- Web Interface for configuration
- NTRIP Client/Server/Caster
- TCP/UDP Socket Server/Client
Documentation
Start here:- Get started with the User Guide
Datasheet- Download CAD model
- Download Footprint
You may also need…
-
RTK starter kits
simpleRTK2B – Basic Starter Kit
From 211,00€ This product has multiple variants. The options may be chosen on the product page -
-
Plugins4G NTRIP Master
175,00€ This product has multiple variants. The options may be chosen on the product page -
-
Description
Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.
Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units
Specifications
2B Survey Budget antenna
Antenna element
· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm
Electrical
· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2
Mechanical
· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male
Environmental
· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed
Documentation
Start here
The ArduSimple WiFi NTRIP Master enables your RTK receiver to connect autonomouly to internet, by using any WiFi network, and without the need of a PC. No programming is required to use this product. The device also creates its own Wi-Fi, which allows you to access a web interface for configuration.
You can use this product to:
– Connect your GPS receiver to NTRIP RTK correction service, using its integrated NTRIP server/caster/client functionality
– Transport a serial port stream over Wi-Fi or internet, using its integrated TCP/UDP sockets
Good to know:
– If your Wi-Fi network has internet access, the WiFi NTRIP Master will also then have internet access. Or you can turn on the hotspot feature on your phone
– Default configuration is at 115’200bps
– Compatible with all ArduSimple products or any board with XBee socket
– Integrated WiFi antenna (contact us for external antenna variant)
– It’s open source and you can find the design files and source code in GitHub: https://github.com/nebkat/esp32-xbee/releases
– It is the same hardware as the BLE Bridge so you can also use it for that purpose (by changing the firmware)
Specifications
Interfaces- UART (3.3V)
- RS232 (requires accessory)
- Wi-Fi 2.4GHz
- Wi-Fi compliant with 802.11 b/g/n
- Onboard Wi-Fi antenna (contact us for option with uFL connector)
- Operating voltage: 3.0V to 3.6V
- Operating current: typically 80 mA (up to 500mA peak)
- Operating temperature Range: -40 to +85deg
- Simultaneous Wi-Fi Station and Wi-Fi Hotspot
- Web Interface for configuration
- NTRIP Client/Server/Caster
- TCP/UDP Socket Server/Client
Documentation
Start here:- Get started with the User Guide
- Datasheet
- Download CAD model
- Download Footprint
You may also need…
-
RTK starter kits
simpleRTK2B – Basic Starter Kit
From 211,00€ This product has multiple variants. The options may be chosen on the product page -
-
Plugins
4G NTRIP Master
175,00€ This product has multiple variants. The options may be chosen on the product page -
-
