Shipping to 
and 
simpleRTK2B Lite
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum
has been the industry’s standard dummy text ever since the 1500s.
199,00€
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 199,00€ |
| >=50 | 169,00€ Click here for bulk orders |
| >500 | Contact us for special pricing |
Includes:
– 1 simpleRTK2B Lite board (ZED-F9P)
– 1 USB-C Carrier Board for XBee Plugins
– 1 USB to USB-C cable
Enhance your experience, add to your cart:
-
Shield for Septentrio Native Ethernet
Original price was: 42,00€.38,00€Current price is: 38,00€.
simpleRTK2B Lite
199,00€
Availability: In stock
This product comes with 2 years worldwide warranty
| Units | Price per unit |
|---|---|
| <50 | 199,00€ |
| >=50 | 169,00€ Click here for bulk orders |
| >500 | Contact us for special pricing |
Includes:
– 1 simpleRTK2B Lite board (ZED-F9P)
– 1 USB-C Carrier Board for XBee Plugins
– 1 USB to USB-C cable
simpleRTK2B Lite is a compact standalone board that allows to integrate dual band RTK GNSS technology including centimeter level accurate position.
It’s powered by u-blox ZED-F9P module and can be used standalone with a USB cable, or connected Ardupilot / Pixhawk (JST connector). It can provide up to 10 RTK positions every second.
This board is ideal for a compact and lightweight ZED-F9P integration.
More details are available in the Specifications and Documentation tabs.
Good to know:
– This product is compatible but doesn’t include multiband GNSS antenna, which is necessary to use the product.
– The module will not give good performance with a standard GNSS antenna, requires a multiband one.
– This product can be used as Base or Rover
– This board is recommended if you want to have u-blox ZED-F9P performance.
– The onboard XBee socket can be used to expand functionality with Plugin accessories (MR/LR radios, Bluetooth, WiFi, Ethernet, Dataloggers, RS232, Canbus, L-Band). Not compatible with high power XBee accessories (XLR radio and 4G NTRIP Master).
– Compatible with Ardusimple plastic case for Lite board
Product Change History:
– AS-RTK2B-LIT-L1L2-SMA-00: initial version
– AS-RTK2B-LIT-L1L2-SMA-01: changed included adapter board from Mini-USB to USB-C
Specifications
ZED-F9P features- Centimeter level precision
- <1cm with a base station up to 35km
- <1cm with NTRIP up to 35km
- <4cm with SSR corrections
- <1.5m in standalone mode
- <0.9m standalone with SBAS coverage
- Update rate
- Default: 1Hz
- With maximum performance: up to 10Hz
- With reduced performance: up to 20Hz
- Multi band: L1, L2 and E5b support
- Multifrequency and Multiconstellation:
- GPS: L1C/A L2C
- GLONASS: L1OF L2OF
- Galileo: E1-B/C E5b
- BeiDou: B1I B2I
- QZSS: L1C/A L2C
- SBAS: WAAS, EGNOS, MSAS, GAGAN and SouthPAN
- Start-up times:
- First position fix: 25 seconds (cold), 2 seconds (hot)
- First RTK fix: 35 seconds (cold)
- RAW data output in UBX format
- Base and Rover functionality
- Operating temperature Range: -40 to +85deg
- Documentation: RED, RoHS
Documentation
Start here:- Get started with the User Guide
Datasheet- Configuration files
- Download CAD model
- How to configure simpleRTK2B as static base station
- How to share your base station with RTK2go NTRIP Caster
- How to visualize GNSS RTK real-time data in Google Earth
- How to log basic data with simpleRTK2B ZED-F9P integrated memory
- simpleRTK2B performance with NTRIP correction services
- How to connect simpleRTK2B series receiver to a NTRIP correction service via PC
- Testing simpleRTK2B accuracy in RTK base-rover configuration
You may also need…
-
-
-
-
-
Plugins4G NTRIP Master
175,00€ This product has multiple variants. The options may be chosen on the product page -
Description
Survey grade and low cost Dual band (L1, L2/E5b/B2I) active
GNSS antenna with TNC connector and 2.5m cable terminated
with SMA male. Supports GPS, GLONASS, Galileo, and BeiDou.
Perfect match for u-blox ZED-F9P and Septentrio Mosaic-H
boards.
Good to know:
· Compatible with all simpleRTK2B boards as well as any other
multiband GNSS receiver in the market.
· Bulk pricing starting 50 units
Specifications
2B Survey Budget antenna
Antenna element
· Supported positioning signal bands:
· GPS: L1, L2
· GLONASS: G1, G2
· BeiDou: B1, B2
· Galileo: E1, E5b
· QZSS: L1, L2
· SBAS: WAAS, EGNOS, MSAS and GAGAN
· Polarization: RHCP
· Peak gain: 5dBi
· Axial Ratio @ zenith: <3dB
· Azimuth Coverage: 360 degrees
· Impedance: 50 ohm
· Phase center error: ±3mm
Electrical
· Supply voltage: 3-5.5V
· Typical supply current @ 3V: 50mA
· Average LNA gain: 40dB
· Maximum Noise Figure: 1.5dB
· Maximum VSWR: 2
Mechanical
· Maximum length: 147mm
· Weight: 390g
· Mounting style: Magnetic base (requires accessory) or 5/8” x
11TPI thread
· Connector: TNC female
· Cable length: Includes 2.5 meter cable terminated in SMA male
Environmental
· Operating Temperature: -40 to +85°C
· Storage Temperature: -40 to +85°C
· IP Rating: IP66 (excluding air vent in screw hole, which can be
sealed when installed
Documentation
Start here
simpleRTK2B Lite is a compact standalone board that allows to integrate dual band RTK GNSS technology including centimeter level accurate position.
It’s powered by u-blox ZED-F9P module and can be used standalone with a USB cable, or connected Ardupilot / Pixhawk (JST connector). It can provide up to 10 RTK positions every second.
This board is ideal for a compact and lightweight ZED-F9P integration.
More details are available in the Specifications and Documentation tabs.
Good to know:
– This product is compatible but doesn’t include multiband GNSS antenna, which is necessary to use the product.
– The module will not give good performance with a standard GNSS antenna, requires a multiband one.
– This product can be used as Base or Rover
– This board is recommended if you want to have u-blox ZED-F9P performance.
– The onboard XBee socket can be used to expand functionality with Plugin accessories (MR/LR radios, Bluetooth, WiFi, Ethernet, Dataloggers, RS232, Canbus, L-Band). Not compatible with high power XBee accessories (XLR radio and 4G NTRIP Master).
– Compatible with Ardusimple plastic case for Lite board
Product Change History:
– AS-RTK2B-LIT-L1L2-SMA-00: initial version
– AS-RTK2B-LIT-L1L2-SMA-01: changed included adapter board from Mini-USB to USB-C
Specifications
ZED-F9P features- Centimeter level precision
- <1cm with a base station up to 35km
- <1cm with NTRIP up to 35km
- <4cm with SSR corrections
- <1.5m in standalone mode
- <0.9m standalone with SBAS coverage
- Update rate
- Default: 1Hz
- With maximum performance: up to 10Hz
- With reduced performance: up to 20Hz
- Multi band: L1, L2 and E5b support
- Multifrequency and Multiconstellation:
- GPS: L1C/A L2C
- GLONASS: L1OF L2OF
- Galileo: E1-B/C E5b
- BeiDou: B1I B2I
- QZSS: L1C/A L2C
- SBAS: WAAS, EGNOS, MSAS, GAGAN and SouthPAN
- Start-up times:
- First position fix: 25 seconds (cold), 2 seconds (hot)
- First RTK fix: 35 seconds (cold)
- RAW data output in UBX format
- Base and Rover functionality
- Operating temperature Range: -40 to +85deg
- Documentation: RED, RoHS
Documentation
Start here:- Get started with the User Guide
- Datasheet
- Configuration files
- Download CAD model
- How to configure simpleRTK2B as static base station
- How to share your base station with RTK2go NTRIP Caster
- How to visualize GNSS RTK real-time data in Google Earth
- How to log basic data with simpleRTK2B ZED-F9P integrated memory
- simpleRTK2B performance with NTRIP correction services
- How to connect simpleRTK2B series receiver to a NTRIP correction service via PC
- Testing simpleRTK2B accuracy in RTK base-rover configuration
You may also need…
-
-
-
-
-
Plugins
4G NTRIP Master
175,00€ This product has multiple variants. The options may be chosen on the product page -
